[TLS]

Check this out.

It's an 8' Meyer Snowplow, yet it's clearly NOT a C or Husky moldboard. Seems to be a normal ST series moldboard attached to a C or Husky series Sector and A-Frame.

Its on eBay here... http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6763&item=2448651234


And he lists it as a '99 -'00. Doubtfull, but what is it exactly?


Did Meyer make an 8 foot lightweight plow with Husky Sector and A-Frames? Or is this a modified piece?


I was just a little bored and was surfing Ebay and found it. It immediatly jumped out at me as something didn't look right.

Here is how they are supposed to look.

 

[Assured Services]

That's not a 1999, my dad had a meyer blade that had an a-frame that looked like that except for the angle iron on the top. That was back in the late 60's early 70'. If that is a 1999-2000 blade it's not a newer A-frame.

 

[TLS]

That angle on the top of the A-Frame appears to just be a loose piece of angle iron laying across it. Still though, the A-Frame itself doesn't look quite right either.