Hello, I bought a truck in Aug and it has an E-60 pump and 7.5 poly blade. I tested it before the season and it lifted and angled fine. After plowing for a couple hours, with only 3" it started making a clicking noise while lifting. It does not make the noise angling, only raising. It raises fine but I can hear the click from in the truck. I checked the fluid and its fine, I waited until a warm day earlier this week thinking it was the cold, but its still there. Please help with any ideas or advice, I should be able to do minor work on it, but I have never worked on a plow pump before. This early in the season I would rather not have to cough up the money to pay someone to check it, if it could be an easy fix. Thanks Dano
E-60 Clicking while lifting
juicedwildcat
1 - 1 of 12 Posts
Joined
·
4,282 Posts
Get someone to raise the plow while you are out at the pump to hear exactly where the clicking is coming from. Make sure you are clear of all pinch areas of the plow before attempting this!!!! The first thing that came to mind when I read your post is the pump solenoid clicking which would make the pump go on and off with the clicks. What else is occurring when you hear the clicks?
1 - 1 of 12 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
