Snowplow Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I bought a used Meyer #47 snow plow without wiring. I replaced the wiring, now the ram is stuck in the up position. Two things I question, the up and down toggle switch only returns to center off in one direction the other direction it stays on?

The left and right hydraulic hoses are connected together?
 

·
Registered
Joined
·
201 Posts
The toggle switch that stays down is your down position and float.

The angle hoses need to be connected to the fittings at the pump.
 
1 - 3 of 3 Posts
Top