Snowplow Forums banner

21 - 40 of 136 Posts

·
Registered
Joined
·
677 Posts
Hey, did you hear about the guy that’s in Lubuck Texas. He’s looking for a snow plow for his three-quarter ton truck.
 

·
Registered
Joined
·
1,325 Posts
Discussion Starter #30
So, we haven’t come to the best part of banning automatic transmissions— reduction in traffic— because people like you Snofarmer will not be driving anymore. It was clear from all your statements you suck at driving a manual gearbox and require the truck to drive itself.
 

·
Registered
Joined
·
232 Posts
So, we haven’t come to the best part of banning automatic transmissions— reduction in traffic— because people like you Snofarmer will not be driving anymore. It was clear from all your statements you suck at driving a manual gearbox and require the truck to drive itself.
They have trucks that drive themselves? Does Tesla know about this?
 

·
Registered
Joined
·
677 Posts
No need to double clutch
From your link
http://www.roadranger.com/ecm/idcplg?IdcService=GET_FILE&allowInterrupt=1&RevisionSelectionMethod=LatestReleased&noSaveAs=0&Rendition=Primary&&dDocName=RR_TRDR-0150
“Models in this series provide six forward speeds and one reverse, and are shifted as you would shift any synchronized manual transmission. Follow the simple 6-speed shift pattern.”

“Upshift
In the following instructions, it is assumed that the driver is familiar with operating heavy-duty trucks and tractors, and can coordinate the shift lever movement and clutch pedal to make smooth gear engagements while upshifting or downshifting.
1. Depress the clutch pedal, move the shift lever to next desired speed.
2. Release the clutch pedal.
3. Accelerate.
4. Continue upshifting.
Downshift
In the following instructions, it is assumed that the driver is familiar with operating heavy-duty trucks and tractors, and can coordinate the shift lever movement and clutch pedal to make smooth gear engagements while upshifting or downshifting.
Note: Although the transmission’s first gear is synchronized it is advised that a down- shift into first gear be completed at a very slow vehicle speed to prevent engine overspeed.
1. Always use the clutch when downshifting from gear to gear to prevent prema- ture synchronizer failure.
2. Depress the clutch pedal, move the shift lever to next desired speed.
3. Release the clutch pedal.
4. Slow vehicle.
5. Continue downshifting.

Yes they did give instructions on how to double clutch but no place did they say you ALWAYS have to they actually give instructions to the contrary.
 
21 - 40 of 136 Posts
Top