Snowplow Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
61 Posts
Discussion Starter · #1 ·
I have a virgin 1000 hitch mount spreader that I hooked up last night and it worked fine. I went to use it this morning and it is not getting any power what so ever. The controller is showing no signs of being alive. I checked all of the fuses, there is only one with it, but I put a fuse tap in for the ign. hot wire. All of the connections are tight to ground and positive, but still no power.
If anyone has any clue how to make this thing run, please help.

Jeff
 

·
Registered
Joined
·
610 Posts
get a test light
start where you tied into the 12v positive
john plowing! plowing!
 

·
Registered
Joined
·
61 Posts
Discussion Starter · #3 ·
I checked the voltage on everything and it was the inline fuse going to the ign. on wire. The fuse for some odd reason seems really cheap and would work on and off if you pulled on the ends. I decided to get rid of it since I have a fuse tap at the fuse box. Problem solved, thanks for the help.

Jeff
 
1 - 3 of 3 Posts
Top