[melvers78]

Hi I’m new in this forum. I need some help to wiring a SnowX 1075 spreader
I just bought the spreader. And I had pretty much all the wires connected except for the that needs to be toggle to the vehicle switch accessories. Don’t know where that wire needs to toggle. Any recommendations will be appreciated

the spreader will be installed on 2010 Chevy Silverado 2500

 

[cwren2472]

You use a fuse tap to connect it to an ignition switched oem truck fuse in your fuse box.

 

[melvers78]

You use a fuse tap to connect it to an ignition switched oem truck fuse in your fuse box.

So it’s safe if I use the turn lights fuse??

 

[SnoFarmer]

Try finding a circuit with a higher amp fuse
Like the heater fan or wipers

 

[cwren2472]

So it’s safe if I use the turn lights fuse??

Generally no as the light fuses are typically not ignition switched. If they were, the lights would never work with the key off. Turn signals may work, as those sometimes will not work with the key off but as @SnoFarmer said, a fuse that is higher amperage on a less essential circuit is better. First choice would be one labeled IGNITION, second we usually try the 12v power outlets, third would be things like heated seats, heated mirrors, etc.