Snowplow Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
610 Posts
Discussion Starter · #1 ·
hooked up the backup just to see if it works
plow moves slow in all directions
wont even go all the way up
motor sounds like its straining
the fluid is full

john
 

·
Site Founder
Joined
·
5,721 Posts
John, if it has been sitting long, you might want to pull the motor and check the bronze bushing on the motor shaft. I had one sieze up on me. The steel motor shaft rusted. I was able to get the bushing off, and clean off the rust. I soaked the bronze bushing in oil over night. All was well for 3 years after that.

~Chuck
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top