[Mikefelix78]

I have a western unimount plow I have replaced all wires an motor relay an still runs after I lift plow . An help would be appreciated.

 

[SnoFarmer]

Make sure the solenoid is wired properly.
Look for any frayed wires for a short:

Then it’s on to the controller

 

[Mikefelix78]

Make sure the solenoid is wired properly.
Look for any frayed wires for a short:

Then it’s on to the controller

No wires are frayed I put my other plow on an different controller an dose the same thing

 

[SnoFarmer]

Check it again and the plugs

Post a pic of your solenoid.

It can only run if the solenoid is activated.
Or it’s Bad, wired wrong or there is a short in the harness. your telling us it does the same thing even with a different controller.
So we can rule out the controller.

 

[Lnwolf1932]

I have a western unimount plow I have replaced all wires an motor relay an still runs after I lift plow . An help would be appreciated.

I also have a western plow at first it just quit working all I could hear was the solenoid clicking once I replaced it then everytime I moved the plow the motor kept running thought maybe I bought a bad solenoid so I went to a different store and bought another solenoid same results???