Snowplow Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
22 Posts
If you "run" pump by jumping solenoid only. it should swing left, not raise, as that is the default mode.
Anyway, looks like what you have is a early to mid 70's Dodge dealer installed setup. They used different switches, general wiring should be the same, but maybe not on the back of the switches, as one Meyer switch is special. Anyway, will leave you links to the standard Meyer wiring, you should be able to figure it out from there--
 
1 - 1 of 1 Posts
Top