Snowplow Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Looking for some help

recently installed a super v2 with a v70 on a 2017 f250 I have everything hooked up but only have lights no plow functions at all. Has anyone ran into this before. I have rechecked my wiring and it looks to correct but am at a loss right now.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
I do have power at the solenoid and the motor will turn if I put power to it. The one thing I noticed is the white wire that goes on the solenoid I thought should have power on it but it is grounded all the time.
 

·
Registered
Joined
·
226 Posts
As far as I no, the white wire is solenoid signal, do you have the blue wire fuses and giving power to the controller. That solenoid grounds thru its base, make sure it is mounted on something metal. Check the base ground with a test light, or run a ground wire from the base to battery negative.
 
1 - 4 of 4 Posts
Top