Snowplow Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I’m having issues. None of the functions on the controller are working as they should except the down it works properly, here is how each function button responds.
left arrow - up
right arrow - nothing
down arrow - down
up arrow - down
retract 1 - down
retract 2 - down
wing 3 - nothing
wing 4 - nothing
when i plug in the pole to the isolation module there is a click even without the hand controller plugged in which indicates a draw to me
the plow switches into float mode on its own regularly
advise from the western dealer close to me told me the problem was the solenoid which i have replaced with no change.
does anybody know if i could bypass all of the computer modules and use a Boss Vplow controller and wire it directly to the control valves
any input will be greatly appreciated
Thanks, Don
 
1 - 4 of 4 Posts
Top