Snowplow Forums banner
1 - 2 of 2 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Hi everyone!
I have a recently rebuilt e57 that I set up on my truck and it worked great. Went left, right, up and down. Had some mechanical work to get done on the truck so disconnected the blade. A few weeks later I go to hook the plow back up and blade goes up and down but if I angle left it does opposite and goes right and is stuck right. One hose is left pressurized and have to tap the fitting off with a hammer. I have replaced the couplers and c coil is good. C coil comes off the valve fairly easy and is not swollen. Any help would be greatly appreciated!
1 - 2 of 2 Posts