Snowplow Forums banner

Meyer E 47 Intermittent Issue

Tags
e47 meyer
904 views 0 replies 1 participant last post by  DaveSchlarb 
#1 ·
I'm troubleshooting an intermittent issue with my E 47. Occasionally when I try to raise or angle the blade to the right, it angles left. I replaced the "A" Valve and Crossover Relief, and rebuilt the "B" and "C" Valves last summer... From looking at the flow diagrams in the service manual could something have failed with the "B" check valve? Earlier today I took the "B" coil off and pushed up, or right, on the controller and the blade angled left. Anyone have any ideas?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top