Snowplow Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
8,323 Posts
Discussion Starter · #1 ·
I need a front axle input yoke for my 77 Jimmy,the yoke where the front driveshaft connects to the front axle.It's a GM 10 bolt.

One of the tabs that locates the u-joint is busted off,and it keeps chucking the cap off the u-joint.I've welded a washer onto the retaining strap as a temporary fix,but would like to put another yoke on it.

Any one got one lying around ?
 

·
Registered
Joined
·
324 Posts
would a 1980 blazer have the same yoke you would need? i have one for parts, will check when i get to work in the am to see if it is a 10 bolt or not Jay
 

·
Registered
Joined
·
8,323 Posts
Discussion Starter · #4 ·
Yes,the 80 Blazer will have a 10 bolt.

It's the yoke on the diff I need,not on the driveshaft.
 

·
Registered
Joined
·
8,323 Posts
Discussion Starter · #7 ·
Problem solved. :D

Towman dug one up,and rushed off after work to get it to the UPS office that night.Even took the trouble to call me personally and let me know.

Many thanks,good deeds do not go unrewarded.

Thanks to all who took the time to respond.
 
1 - 9 of 9 Posts
Top