Snowplow Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
225 Posts
Discussion Starter #1
So I had this lightbulb idea while replacing a brake line (argh!) on my K1500 the other day. It has the round style bump stops like this:


Notice the hole in the center of the bump stop. I found that 1/2" ID trans cooler hose is a nice snug fit in there. So for laughs I stuck a piece in each one and cut it off flush. Added about 1/4" ride height with the blade raised and it doesn't bottom as easy on bumps. Will they stay? That I don't know. But for 6 inches of hose from the used hose bin and 6 minutes of my time I can't complain.
 
1 - 1 of 1 Posts
Top