[CHASLA]

My fisher HD2 7'6" straight blade purchased new in July 2019 on a 2017 Ford F350 diesel is VERY difficult to install (mount) It is dealer installed the mounting pins refuse to engage without much jostling, jacking (floor jack) and cursing average mount time about a half hour. I have taken the truck/plow back to the Fisher dealer and he was able to dismount and re-mount the plow with little difficulty This is not my first Minute Mount Plow. the last one mounted and dismounted with ease. So I know how its supposed to work SOMETHING is wrong. Anyone having a similar problem? Any help would be appreciated.

 

[Rich]

Did anyone tell you to adjust the slack in the lift chain from triangle?

 

[Rich]

Yup ! You definitely need enough slack for the head to be able to tip backwards towards your truck for the pins to pop in.

 

[Rich]

Picture of where to put a nylon strap to make it a minute mount system for a fix for mounting Fisher MM2 on unloved ground.
Pictures wouldn’t load just put the strap from upper triangle to lower frame towards plow blade, simple. View attachment 31531

 

[RBI Plowing]

My fisher HD2 7'6" straight blade purchased new in July 2019 on a 2017 Ford F350 diesel is VERY difficult to install (mount) It is dealer installed the mounting pins refuse to engage without much jostling, jacking (floor jack) and cursing average mount time about a half hour. I have taken the truck/plow back to the Fisher dealer and he was able to dismount and re-mount the plow with little difficulty This is not my first Minute Mount Plow. the last one mounted and dismounted with ease. So I know how its supposed to work SOMETHING is wrong. Anyone having a similar problem? Any help would be appreciated.

I have. 2019 RAM 2500 with a 2021 Fisher HD2 7- 6 straight blade and it’s a chore I don’t look forward to. I too have to use a jack on the passenger side pin (every time). Like you, Dealer has no issue…this is my second year with the plow so I guess I’m still on a learning curve; it’s getting old!

 

[Rich]

I have. 2019 RAM 2500 with a 2021 Fisher HD2 7- 6 straight blade and it’s a chore I don’t look forward to. I too have to use a jack on the passenger side pin (every time). Like you, Dealer has no issue…this is my second year with the plow so I guess I’m still on a learning curve; it’s getting old!

there's a video of what I do to store and mount my Fisher MM2 on one of the other links for trouble mounting FisherMM2