Snowplow Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi frist time here,
I bought a Myer snow plow and controls are shot.
I am trying to use toggle switches to control the blade.
I have dpdt switches 2ea and a spst for the power to the fuse box can anyone help me out
 

·
Registered
Joined
·
214 Posts
You want ignition fused power to the switches. A triple throw triple pole momentary switch for the angle. Power jumps the center, then one side both to the solenoid, the other side one to the C valve. the other side goes no where as the plow motor dead heads to one angle side. The other switch, one side momentary, the other side stationary, three ple three throw. Power is the center, one side, only one terminal will join into the solenoid circuit, then one to the float valve, and the other to the raise valve.
 
1 - 3 of 3 Posts
Top