Snowplow Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Pump stays running and plow goes left. Had to unplug main power plugin to get it to stop. Any ideas
 

·
Registered
Joined
·
226 Posts
When the plow motor stays running, unplug the controller. If it stops, replace the controller, if it stays running, replace the solenoid. It going to the angle side because that's the default function when the motor is running with no valve function.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
When the plow motor stays running, unplug the controller. If it stops, replace the controller, if it stays running, replace the solenoid. It going to the angle side because that's the default function when the motor is running with no valve function.
Okay thanks. I’ll try replacing it first. It looks just like one off a old ford pickup from the 90
 

·
Registered
Joined
·
226 Posts
The solenoid is a three wire, grounds thu its base. The old ford is a four wire, not the same part.
Get the correct part.
 
1 - 5 of 5 Posts
Top