Snowplow Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey guys new to here . I have a snow dog md75 I've changed my coils put a new sylinoid on was clickn but has stopped controller lights up but no sound no movement pump is ok control wire from cab side controller harness red wire to solenoid has no power at all even when buttons pushed I'm at a loss here and missing out on money with it being down any suggestions would be great thanks
 

·
Registered
Joined
·
3 Posts
Hey guys new to here . I have a snow dog md75 I've changed my coils put a new sylinoid on was clickn but has stopped controller lights up but no sound no movement pump is ok control wire from cab side controller harness red wire to solenoid has no power at all even when buttons pushed I'm at a loss here and missing out on money with it being down any suggestions would be great thanks
What model plow and pump? You have wire off somewhere, fuse in the controller, and or sylonoid wired wrong.. they’re simple let me know how make out 👍 CHECK GROUNDS LOL
 

·
Registered
2018 F150
Joined
·
1 Posts
did you check the controler and wires ??
the original controlers are known for problems.
 
1 - 4 of 4 Posts
Top