Snowplow Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
44 Posts
Discussion Starter · #1 ·
Hello all.

My older Curtis plow has some aged connectors and lately I've resorted to using a hose clamp to keep them tight enough to be able to control / use the plow.

I checked online and only came across the newer style, which the site said is not a direct replacement for my connectors.

Question 1: Does anyone know of a source for the older style connectors? My connectors have 2 big pins for power and ground, the new style does not.

Question 2: Has anyone used the newer style and spliced it in to the older harness? I am thinking that, if the wires are just a different color, then all I would have to do is grab both schematics and match up using the purpose of the wires and not the color of the wires.

Thanks for any help on this.

Chris
 

· Super Moderator
Joined
·
980 Posts
Yes
Go to boss or amazon

 

· Registered
Joined
·
512 Posts
Yes
Go to boss or amazon

Boss used about the same plugs. The OP is going to have to re-wire it to work. I do not think you can get the Curtis plugs anymore. And the repair ends sucked anyway.
 
1 - 3 of 3 Posts
Top