Snowplow Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have changed the fluid and cleaned filter. But when I use control it wont do anything. Checked all connections and even changed the solenoid. If I jump solenoid over the motor and pump work and it raises the cylinder. I'm new with this plow thing and was curious if someone steer me in the right direction. Thanks and I appreciate everyone's knowledge.
 

·
Registered
Joined
·
90 Posts
The solenoid has 2 small terminals, one is positive that Is jumpered off the main positive coming in from the battery. The other small terminal is negative and it gets its signal from the joystick via the cables. So test light the small terminals and see what your missing, positive or negative
 
1 - 4 of 4 Posts
Top