Snowplow Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
544 Posts
I thought a RT3 mount was a RT3? I will have to go measure. It's on a 2009 Ram 2500.
It's not. They have the RT3 which fits 7.5 standard to 9' superduty, they have the RT3 Sport/HTX which fits the downsized plows (which yours is based on the photo), and then they have the RT3 heavy duty used on the 10' plows.

Unfortunately, there is no pushbeam for your truck that fits that plow. That plow is intended for 1/2 ton or smaller trucks and they deliberately don't make a mount to match that plow.

To make it work, welding and fabricating would have to be done.

Here is the list of pushbeams:


Yours is PBA05044-03 from LTA04770D and there is no HTX/Sport duty pushbeam with those same dimensions.
 

·
Registered
Joined
·
544 Posts
I measured and it's a standard RT3. Is there anything on the plow to see it its standard or sport?
The sticker on the back of the blade would identify it but the poly blade and only 2 trip springs indicates that it's either a sport or htx. The lack of a SH2 switch indicates it's a sport since they included it standard on the HTX models.
 
1 - 4 of 4 Posts
Top