[Ramplow]

Lost both my low beams. First the left and a week later the right. Dealer told me one bulb was bad and I blew a fuse. They said sometimes fuses "just" blow and that its been a problem with new plows. NOW my R/F plow blinker filament lights up solid, on occasion, with all the lights off. Dealer is telling me its a problem that Fisher is working on and they will get back to me. Any one else having lighting issues with new Fisher Plows? This is a new truck and new plow 1500 miles

Thanks for reading

 

[cwren2472]

Who installed the plow? And do you have a receipt showing the parts they used? That turn signal getting stuck on always comes from a bad relay on the harness going to the headlights but that truck shouldn't have a harness going to the headlights at all. RAM supplies a factory set of wires specifically for the plow. If its staying on, it's a problem with the RAM factory supplied wiring and the truck BCM controlling it. Which wouldn't terribly surprise me but I've never heard of it happening. But the other possibility is someone installed the wiring differently than they should have.

 

[Ramplow]

Who installed the plow? And do you have a receipt showing the parts they used? That turn signal getting stuck on always comes from a bad relay on the harness going to the headlights but that truck shouldn't have a harness going to the headlights at all. RAM supplies a factory set of wires specifically for the plow. If its staying on, it's a problem with the RAM factory supplied wiring and the truck BCM controlling it. Which wouldn't terribly surprise me but I've never heard of it happening. But the other possibility is someone installed the wiring differently than they should have.

Hey Thanks for responding! I bought the truck and plow new at the dealer. The plow was installed at the dealer (or maybe they sublet it out idk) prior to me picking up the truck. Dealer told me they were a Fisher plow dealer so I assumed it was installed by them with all the proper parts. The only receipt I have shows the plow as a whole and the price. Its not itemized. The light is on sometimes and sometimes its off, strange...

 

[cwren2472]

It'll be hard to verify if you aren't familiar with the pieces but the correct plow harness will connect to a bundle of wires below the fuse box on the drivers side. There shouldn't be any harnesses connecting to the actual truck headlamps.

 

[Kayyydavis11]

Was this issue ever resolved? I’m currently experiencing the same problem.

 

[jterry5549]

i put new led lights on my plow, all lights worked as they should at first then the running lights and directionial lights will not switch over from truck to plow but headlights do

 

[SnoFarmer]

Closing this out

I see you already started a new thread with the same question.
So I will keep all of your replies in the same place with your new thread
thanks