Hey guys, I’ve searched everywhere but can’t find what I need, which brought me here. I just picked up a used 2 plug ultramount. I have the wiring harness only. still need to pick up the battery-plow harness. I also need the motor relay. I can’t figure out how the light harnesses connect to the turn signals and headlights besides plugging in the harness to the trucks stock harness, which obviously eliminates the actual headlights and turn signal. is there a guide or anyone with knowledge of how to splice into it or if there’s an adapter with a pigtailed plug or something. I can probably figure out the diagrams for the rest of the wiring. Also on the two plug type, should i have the harness that holds all the fuses? The only one supplied is for lights and the other harness is only for power with the 2 pin. The lighting harness is 9pin if that matters. I feel like i’m missing something but the guy i got it from said he gave me everything, obviously he’s now checking for the motor relay and power harness for me but is there anything else I should have? and something unrelated to electrical- the plow was placed by machine moldboard down on my trailer, only on the trailer like that since 3pm yesterday and i noticed a lot of fluid all over the mold board. is it ok that it leaked? i’ll obviously refill it but is that a bad sign? he said he had it serviced and it has new angle pistons and hoses.Thanks for any advice/help/links in advance.