Snowplow Forums banner
Cancel

Gallery

Navigation

Browse albums
phone camera 030

phone camera 030

  • 0
  • 0
phone camera 025

phone camera 025

  • 0
  • 0
phone camera 030

phone camera 030

  • 0
  • 0
77 K30 002

77 K30 002

  • 0
  • 0
My 86 CUCV

My 86 CUCV

  • 0
  • 0
84 K30 Cummins 6 BTA

84 K30 Cummins 6 BTA

  • 0
  • 0
26 This is how far the driver's side one hangs outpast the truck.

26 This is how far the driver's side one hangs outpast the truck.

  • 0
  • 0
25 With the plow angled torward the driver's side (same as the last pic) and both wings at their 45deg position, this is how far the passenger side wi

25 With the plow angled torward the driver's side (same as the last pic) and both wings at their 45deg position, this is how far the passenger side wi

  • 0
  • 0
24 Plow down. Both wings still at their 45deg position.

24 Plow down. Both wings still at their 45deg position.

  • 0
  • 0
23 Plow in up position. Both wings set to their 45deg position.

23 Plow in up position. Both wings set to their 45deg position.

  • 0
  • 0
22 Wing into place. You can see the better looking topcoat of silver. I also painted the bracing on the back of the wing in black to make them look l

22 Wing into place. You can see the better looking topcoat of silver. I also painted the bracing on the back of the wing in black to make them look l

  • 0
  • 0
21 Back of the bracket. good shot of the bolts

21 Back of the bracket. good shot of the bolts

  • 0
  • 0
20 side of the brackets showing the 3 through bolts (1/2" grade 8) The two additional sleeves that you see are the ones that came installed on t

20 side of the brackets showing the 3 through bolts (1/2" grade 8) The two additional sleeves that you see are the ones that came installed on t

  • 0
  • 0
19 coming around the corner of the brackets

19 coming around the corner of the brackets

  • 0
  • 0
18 Brackets bolted in.

18 Brackets bolted in.

  • 0
  • 0
17 Plow back to "stock" form.

17 Plow back to "stock" form.

  • 0
  • 0
16 Plow frame all painted before putting the stainless moldboard back on.

16 Plow frame all painted before putting the stainless moldboard back on.

  • 0
  • 0
13 I did something like 3 or 4 coats on the 1X2. You can see that I did it with a brush but I was not exactly looking for an automotive smooth finish

13 I did something like 3 or 4 coats on the 1X2. You can see that I did it with a brush but I was not exactly looking for an automotive smooth finish

  • 0
  • 0
15 Coating the black topcoat over the POR-15 silver on the plow frame.

15 Coating the black topcoat over the POR-15 silver on the plow frame.

  • 0
  • 0
14 More of the POR-15 on the back of the wings

14 More of the POR-15 on the back of the wings

  • 0
  • 0
12 POR-15 paint on the back of the wings. The silver coloring is very blotchy as this paint is designed to bond with the metal but IS NOT designed to

12 POR-15 paint on the back of the wings. The silver coloring is very blotchy as this paint is designed to bond with the metal but IS NOT designed to

  • 0
  • 0
11 I painted POR-15 on all bare steel and on all the small rust spots on the plow frame (plow side only)

11 I painted POR-15 on all bare steel and on all the small rust spots on the plow frame (plow side only)

  • 0
  • 0
10 This shows the unpainted bracket slid into the unpainted 1X2. You can also see the longer top bolt poking through the top stainless bushing.

10 This shows the unpainted bracket slid into the unpainted 1X2. You can also see the longer top bolt poking through the top stainless bushing.

  • 0
  • 0
9 Close-up of the square tube going through the 1X2, X-Bracing and Trip Edge Spring bracket.

9 Close-up of the square tube going through the 1X2, X-Bracing and Trip Edge Spring bracket.

  • 0
  • 0
8 This shows the stainless bolts coming through the plow frame.

8 This shows the stainless bolts coming through the plow frame.

  • 0
  • 0
Top