Snowplow Forums banner

Reaction score
0

Marketplace Rating
(0.0 - 0 reviews)

Profile posts Latest activity Discussions Buy & Sell Reviews About

  • · Registered
    Joined
    ·
    144 Posts
    Thanks for help had to take sue to town so going to attack it again tomarow . Start at plug and work tward coils . Will call if i get lost

    · Registered
    Joined
    ·
    144 Posts
    :wink:blizzardgot knob a meiyer guy gave me one to tryt and after a little black tape it worked i have a worm clamp to hold it up so i is good until you or i find nut .
    hope you had a great thanksgiving and say hi to amy and jacob for me .

    · Registered
    Joined
    ·
    144 Posts
    Hows tricks did you get my mail about nut ?also will a meir or fisher knob work or should i just order on ?

    · Registered
    Joined
    ·
    144 Posts
    hey bud could you email me just a discription of were to find power wire to control box . i had a prob today there was no power to brown wire on solinoid so i checked the plug s and they seamed alright so i had sue push one of the buttons and checked truck side plug got nothing at any of the holes. went back in truck to stue as iwas in middle of cust. drive tryed it again and now i have power at all pins and everything works . i tryed 2 diferent controls on is new so figgure its got to be power to control. as i have power through both cables it just wasnt atuataing the solinoid or valves.
    thanks rick
    rsreed384@frontier.com
    new email add.

    · Registered
    Joined
    ·
    18 Posts
    Jerre
    I tore the sleeve out of the A frame of my 1999 Boss 7.5 straight poly -- Christmas eve
    no snow coming but we are planning to weld this up on Christmas afternoon.
    I found one referance to the same failure on ******** and now looking here

    Any suggestions are appreciated
    thanks and merry Christmas
    tc

    · Registered
    Joined
    ·
    105 Posts
    Jerre,

    I am up in Buffalo I just picked up a 2006 Dodge 2500 single cab, long box 4x4 looking for a price on a plow for it. I know you sell Blizzard so whatever model you think the truck will handle the best. If you wanna call me with any questions feel free anytime.

    Thank You
    Jay Zurek
    864-363-1755

    · Registered
    Joined
    ·
    4 Posts
    Jerre,

    Hey I'm looking forward to next weekend. Just wanted to drop a line and let you know that according to his mother, Stephen is still way too young (SMALL) to attend the Erie GTG2010. Hopefully we can give him miracle grow and get some bulk added to him for next year.

    How is QuickBooks working out for you?

    See ya soon.

    Brian

    · Registered
    Joined
    ·
    273 Posts
    Hey Jerre when you get the chance can you give me a quote on a 8611-ss plow for skidsteer. ( bobcat brand if that matters) thanks Jerre

    · Registered
    Joined
    ·
    524 Posts
    hi jerre happy holidays. was wondering if you can give me a price on a right wing for the 8611. would also like to replace all the springs the operate both wings and any thing you recommend we replace while we have it apart. thanks.

    · Registered
    Joined
    ·
    569 Posts
    Jerre all set went to local fisher dealer and they changed out the seal all better. thanks for everything it was a pleasure checking out your neck of the woods for a short visit, will be back.

    · Registered
    Joined
    ·
    215 Posts
    Jerre - What's your take on the new 7600 and 8000 LT lineup? I'm trying to get a read from some of the installers in my area. Most of them have the same feeling that although they had to take significant weight reducing measures to the setups, after closer inspection, are just as strong if not stronger. I did manage to locate a 760LT, new, in PA should decide against the new systems, but it will be a hike for me to pick it up.

    · Registered
    Joined
    ·
    3,402 Posts
    You can take it to a local fisher dealer and have them change out the top seal on the cyl or get a replacement cyl. J

    · Registered
    Joined
    ·
    569 Posts
    So if worse comes to worse I would need to have a new seal pressed in shouldnt I just remove the cylnder and take it to a local shop.Will it need to be pressed or can I tap it on with the proper size deep socket ?

    · Registered
    Joined
    ·
    569 Posts
    Hi Jerre monday morn ,check is in the mail and have just gotten the plow taken off the back of the truck (it was removed across town at a pre-cast concrete place my buddy works at) and on the way home I noticed the blade slowley dropping so had to raise it 4 or 5 times on the way home and on arrival home it was leaking out of top seal of lift ram can I tighten the nut on the top or what should I do next.In front of a large audiance,a parking lot of truck drivers watching me put the plow on for the first time I bdid what you showed me and clink clink that mm2 made me look lioke a pro oh ya I am a pro!!!

    · Registered
    Joined
    ·
    569 Posts
    Hi jerre Ispoke to you a fue weeks back about a fg140 and diffrent blade choices breifley and am picking up truck in two weeks and would like to know the best way to contact you . cell 781 413 4433 or PM . jeff

    · Registered
    Joined
    ·
    593 Posts
    Jerre, I'm customizing a 86 Chevy 8' Fisher on to a 89 K3500. I'm hanging the front off of the bumper bolts (3 each side) and plan to bracket it also off the bottom frame rail with 2 x2 x 1/4" angle iron. My question is I have the back push plates that go on the frame, but nothing else. Do you have a picture of what the front looks like that goes on the plow frame and what are the push arms made out of?, or do you have a used set kicking around? Mike

    · Registered
    Joined
    ·
    1,085 Posts
    Jerre, could you get me a price on an 8' poly edge? I will also need two 2' sections, possibly more. Shipping is to 60190. Thanks, Ron
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top