ultramount pc board questions - Snow Plow Forum - Let's Talk Snow Discussion Forums
 
LinkBack Thread Tools Display Modes
post #1 of 3 Old 02-16-2017, 05:48 AM Thread Starter
Junior Member
 
treeratt59's Avatar
 
Join Date: Feb 2017
Posts: 2
ultramount pc board questions

15 Year old ultramount. Is it possible for the hand held controller to be sending signals to the motor but not the coils? Cleaned can, manifold, pump and all relief valves and replaced coils and switches. Relay is good, cleaned all wire connections, grounds etc. sprayed with die-electric spray too. Pump is fine and motor is fine too. Coils activate switches on bench and motor comes on when I press a control but I get no command to the coils??? Really starting to pull my hair out on this one, and I can't afford to loose any more of that. Could the pc board do that???
treeratt59 is offline  
Sponsored Links
Advertisement
 
post #2 of 3 Old 02-16-2017, 03:50 PM
Senior Member
 
Join Date: Nov 2003
Location: Glenview, Illinois
Posts: 815
Send a message via AIM to Garagekeeper Send a message via Yahoo to Garagekeeper
Easiest thing would be to try someone else's controller on your truck or yours on their's.
Any Unimount or early Ultra will work.
If you need additional help give me a call and I'll try to walk you thru doing a Scat test.

John...

John's Garage
Welding & Equipment Services
Boss: Western: Blizzard: Meyer: SnowDogg:
SaltDogg & SnowEx Spreaders: FallLine Edges:
Sales & Service
plowtec@hotmail.com
847-998-9557
Garagekeeper is offline  
post #3 of 3 Old 02-16-2017, 05:29 PM Thread Starter
Junior Member
 
treeratt59's Avatar
 
Join Date: Feb 2017
Posts: 2
Wink

Quote:
Originally Posted by Garagekeeper View Post
Easiest thing would be to try someone else's controller on your truck or yours on their's.
Any Unimount or early Ultra will work.
If you need additional help give me a call and I'll try to walk you thru doing a Scat test.

John...
So the dealer in Wasilla loaned ma a new controller and a new controller cable, the new controller operates everything properly. Tomorrow morning I'll go pay him, thanks for the reply John, best regards, Michael
treeratt59 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Snow Plow Forum - Let's Talk Snow Discussion Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
on-board scale John Banks Off Topic 2 03-24-2009 10:04 AM
Mold Board Rusting Away Hoofty Meyer / Diamond Snowplows 3 12-31-2007 12:17 PM
newbie to board ted248 Snowplowing Discussions 10 11-21-2007 03:15 PM
Dash board Ole JIM Dodge Trucks 4 03-01-2005 05:12 PM
For the Firefighters on the board gordyo Off Topic 9 11-19-2004 10:51 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome