E-57H wont lower
after the season , I pulled the blade off the truck then hit the up switch. I could not get the ram to lower on the truck by manually pushing it down so I pulled the pump off and when I had it in the vice I found that the ram was bent.
I replaced the ram with a new one but after putting it all back together it still will not lower, even with power to the a-coil. ( and hearing the valve click )
I pulled the A-coil and valve out and everything seems to be free and working fine but I noticed that there was no fluid leaking out with the ram up and the valve out. Is this normal ? shouldn't there be fluid leaking out of the top hole ?
I could not manually lower the ram with the a valve out, Any Ideas ?
No matter where you go, There you are !